Pin | Type | Description / Signal type | Connection / Measuring notes |
---|
1 | E | Rear left speed signal | ABS/ASC control unit |
| | |
2 | | Not used | |
| | |
3 | E | TD signal (engine speed) | DME control unit |
| | |
4 | E | Brake pad wear indicator | Brake pad sensor |
| | |
5 | E | BC remote control | Turn indicator/low beam selector |
| | |
6 | | Not used | |
| | |
7 | E | Tank content I | Electrical fuel pump (EKP I) |
| | |
8 | E/A | CAN-bus high | CAN link |
| | |
9 | E/A | CAN-bus high | CAN link |
| | |
10 | | Not used | |
| | |
11 | E/A | CAN-bus (petrol engine only) | Integrated electronic control unit (IKE) |
| | |
12 | A | Sensor ground I | Electrical fuel pump (EKP I) |
| | |
13 | | Not used | |
| | |
14 | E | Outside temperature | Temperature sensor |
| | |
15 | A/E | Diagnostic link | Diagnostic connector |
| | |
16 | A | Sensor ground II | Fuel supply sensor II |
| | |
17 | | Not used | |
| | |
18 | A | Sensor ground | Remote thermometer sensor |
| | |
19 | E | Coolant temperature | Remote thermometer sensor |
| | |
20 | A | Sensor ground | Brake pad sensor |
| | |
21 | | Not used | |
| | |
22 | A | Sensor ground | Temperature sensor |
| | |
23 | E | Tank content II | Fuel supply sensor II |
| | |
24 | E/A | CAN-bus (petrol engine only) | Integrated electronic control unit (IKE) |
| | |
25 | | Not used | |
| | |
26 | | Not used | |
| | |