The AGS control unit detects the selector lever position by way of a switch on the transmission. This switch converts the current selector lever position into a code. This selector lever code is transferred via four lines (L1-L4) to the AGS control unit.
Selector lever position |
L1 to L4 (0 = open, 1= U-batt) |
|---|---|
P |
L1 =1, L2 = 1, L3 = 0, L4 =1 |
R |
L1 =1, L2 = 0, L3 = 0, L4 =0 |
N |
L1 =1, L2 = 1, L3 = 1, L4 =0 |
D |
L1 =0, L2 = 0, L3 = 1, L4 =0 |
4 |
L1 =0, L2 = 0, L3 = 0, L4 =1 |
3 |
L1 =0, L2 = 0, L3 = 1, L4 =1 |
2 |
L1 =1, L2 = 0, L3 = 1, L4 =1 |
|
|